Firmware Update Emgeton Consul 3 ...

image Indeks       image Finanse,       image Finanse(1),       image Filozofos,       image Fesenjan,       image Fenix,       

Odnośniki

Firmware Update Emgeton Consul 3 English, Tablet Manta Mid 08, Manta mid08

[ Pobierz całość w formacie PDF ]
How to flash firmware in Emgeton Consul 3
What is firmware?
Firmware is program, which is included to hardware and is used to operate all functions. By upgrading
firmware, you can enhance device`s functions and/or fix bugs, found in previous versions.
Requirements for firmware update
For successful firmware update it is needed to have fully operational USB ports in your operating system.
If they are not working or working bad, check, if you have enabled USB in your BIOS and/or check, if you have
latest chipset drivers installed. If all passed, but you still encounter problems with USB, let check your computer in
authorized service center.
Steps to update new FW:
-
Check firmware version and device model
-
Check, whether battery is charged for at least of 50%
-
Power off the tablet
-
Run “
LiveSuit.exe
” file from “
Emgeton Consul 3 4.0.4 IMM76D 20120615
” folder
-
Press and hold “
VOL-
” and “
VOL+
” buttons and connect tablet to PC
-
Keep pressing “
VOL-
” and “
VOL+
” buttons and press power button 5 times. When new hardware Wizard
will ask for driver, install driver from “
Emgeton Consul 3 4.0.4 IMM76D 20120615\UsbDriver
“ and wait until
driver is installed.
-
When asked for another new driver, install driver from “
Emgeton Consul 3 4.0.4 IMM76D
20120615\UsbDriver
“ and wait until driver is installed.
-
Answer “
Yes
” to displayed dialog box and also answer “
Yes
” to another dialog box (all data will be
erased; before continue, backup all important data; memory card content will not be erased)
-
Upgrade will begin and updating progress will be shown. Do not work with your computer or tablet
during updating. Wait for “Upgrade success” message.
-
Press “
Exit
” button, safely disconnect tablet from USB port and power on the tablet
-
Go to “
Settings>Language & input>Language
“ and choose your language
Reset:
If device is not responding, press “
RESET
” button on the top of device for about 3 seconds. Then, press and
hold power button until tablet powers of or on.
Technical support and updated firmware version:
http://podpora.bell-technology.cz
[ Pobierz całość w formacie PDF ]

  • zanotowane.pl
  • doc.pisz.pl
  • pdf.pisz.pl
  • gbp.keep.pl